Bearing Products

According to the customers’ requirements, our special engineer can design and produce all kinds of nonstandard bearings.

Water pump bearings are used primarily in automotive water pumps and basically consisted of standard double row bearings

Thrust ball bearings can support high axial forces but must not be subjectedto radial loads, single and double direction designs available.

These units consist of a double-sealed single-row deep groove bearing, and castiron (or other material) housing in various configurations

With the same center as the bearing, the spherically formed outer ring raceway can make self-alignment.

Many kinds of automotive bearings available: such as wheel hub unit bearings, clutch bearings and multi-tough bearings.

As their rollers linearly come into contact with inner ring and outer ring with less coefficient of friction, these bearings have very good capacity of radial load

The bearings can be dismantled. The parts of the bearings can be fitted separately. Axial spherical roller bearings can support very high axial loads and permit relatively high speeds.

Double row deep groove ball bearings feature higher load ratings than single row bearings, but are very sensitive to misalignments.

they can bear radial, axial load and their combined load, have big load capacity and characteristics of wear-resistance, wear-corrosion, self-aligning and self-lubricate

Angular contact ball bearings are able to support radial load and axial load. As single row angular contact ball bearings can only support axial load in single direction, matched bearing mounting is often adopted to them as matched parts of bearings, preload for them is more convenient