| Prefix |
Suffix |
Definition |
| . |
. |
INCH, I.E: P35 DESIGNATES RADIAL PLAY OF -0.0003 TO 0.0005 INCHES |
| . |
0 |
SHIELD OR SEAL ONV SIDE OPPOSITE FLANGE |
| . |
1 |
ANTI-FRICTION BEARING MFG. ASSOCIATION CLASS 1 |
| . |
3 |
ANTI-FRICTION BEARING MFG. ASSOCIATION CLASS 3 |
| . |
5 |
ANTI-FRICTION BEARING MFG. ASSOCIATION CLASS 5P |
| . |
7 |
ANTI-FRICTION BEARING MFG. ASSOCIATION CLASS 7P |
| . |
9 |
ANTI-FRICTION BEARING MFG. ASSOCIATION CLASS 9P |
| . |
A |
PIVOT BEARING, THROUGH SHAFT |
| . |
C |
RADIAL, L-TYPE RETAINER. |
| . |
DB |
BACK-TO-BACK MOUNTING |
| . |
DF |
FACE-TO-FACE MOUNTING |
| . |
DT |
TANDEM MOUNTING |
| . |
DU |
UNIVERSAL MOUNTING |
| . |
E |
EXTENDED INNER RING |
| . |
F |
FLANGED OUTER RING |
| . |
H |
SINGLE SHIELD |
| . |
HH |
DOUBLE SHIELD |
| . |
LD |
NO LUBRICATION. DRY |
| . |
LG-10 |
ESSO STANDARD OIL ESSO RUST BAN 343 AN-C-124(3) |
| . |
LG-20 |
ESSO STANDARD OIL CO. BEACON 325 |
| . |
LG-31 |
MPB MINAPURE |
| . |
LG-32 |
LEHIGH CHEMICAL CO. ANDEROL L-793 |
| . |
LG-38 |
ESSO STANDARD OIL CO. ANDOCK B MIL-G-18709 |
| . |
LG-39 |
ESSO STANDARD OIL CO. ANDOCK C |
| . |
LG-40 |
DOW CORNING DC-33 (SILICONE) (LIGHT) |
| . |
LGF |
FOLLOWED BY NUMBERS INDICATES SPECIFIC GREASE TO BE USED IN FILM GREASED BEARINGS . |
| . |
LGP |
FOLLOWED BY NUMBERS INDICATES THE SPECIFIC GREASE TO BE USED IN GREASE-PLATING SURFACES |
| . |
LO-1 |
ANDERSON OIL CO. WINDSOR LUBE L-245X MIL-L-6085 |
| . |
LO-11 |
ESSO STANDARD OIL CO. ESSO AVIATION INST. OIL MIL-L-7870 |
| . |
LO-12 |
TEXACO, INC. LOW TEMPERATURE OIL MIL-L-7870 |
| . |
LO-13 |
SHELL OIL CO. AEROSHELL FLUID S3 (E) MIL-L-7870 |
| . |
LO-14 |
LEHIGH CHEMICAL CO. ANDEROL L-281 ORD-14-0-20 |
| . |
LO-2 |
LEHIGH CHEMICAL CO. ANDEROL L-401D MIL-L-6085 |
| . |
LO-3 |
SHELL OIL CO. AEROSHELL FLUID 12 (E+W) MIL-L-6085 |
| . |
LO-30 |
ECLIPSE-PIONEER P-LL |
| . |
LO-4 |
ECLIPSE-PIONEER P-10 MIL-L-6085 |
| . |
LO-6 |
ESSO STANDARD OIL CO. UNIVIS P-38 MIL-L-6085 |
| . |
LOG |
FOLLOWED BY NUMBERS INDICATES SPECIFIC OIL LUBRICANT TO BE USED, THEN CENTRIFUGED. |
| . |
LOV |
FOLLOWED BY NUMBERS INDICATES THE SPECIFIC LUBRICANT TO BE VACUUM IMPREGNATED INTO THE RETAINER. RETAINER MUST BE EITHER PAPER OR COTTON BASE PHENOLIC. |
| . |
LY-11 |
SUPERMIL M-100 (SILICONE) |
| . |
LY-13 |
DOW CORNING DC-44 (LIGHT) SILICONE, MIL-G-15719 |
| . |
LY-15 |
GENERAL ELECTRIC GE VERSILUBE G-300 |
| . |
LY-167 |
SUPERMIL A72832 (MIL-G-2 3827A) |
| . |
LY-17 |
TEXACO, INC. TEXACO UNITEMP 500 |
| . |
LY-185 |
KG80 |
| . |
LY-196 |
AEROSHELL 7 (MIL-G-2 382 7A) |
| . |
LY-1S9 |
KRYTOX 240 AC |
| . |
LY-21 |
DOW CORNING DC-510 (50) FLUID |
| . |
LY-22 |
DOW CORNING DC-200 (10) FLUID |
| . |
LY-231 |
MOBIL 28 (MIL-G-81322A) |
| . |
LY-24 |
ESSO STANDARD OIL TERESSO V-78 |
| . |
LY-250 |
NRL MB-20B |
| . |
LY-252 |
SRG 160 |
| . |
LY-254 |
XRL 743A |
| . |
LY-28 |
GENERAL ELECTRIC GE SILICONE OIL F44 (MIL-S-81087, TYPE II) |
| . |
LY-36 |
DOW CORNING DC-33 (FLUID) SILICONE |
| . |
LY-37 |
DOW CORNING DC-33 (MEDIUM) SILICONE |
| . |
LY-39 |
DOW CORNING DC-200 (12,500 FLUID) |
| . |
LY-4 |
ANDERSON OIL CO. WINDSOR LUBE LS-252 MIL-L-17353 |
| . |
LY-4 8 |
1 PART GE VERSILUBE G-300 (LY-15) WITH 8 PARTS GE VERSILUBE F-50 (LY-5). APPLY WITH SYRINGE. |
| . |
LY-4 9 |
LEHIGH CHEMICAL CO. ANDEROL L-451 |
| . |
LY-40 |
DOW CORNING DC-510 (500) FLUID |
| . |
LY-41 |
LEHIGH CHEMICAL CO. ANDEROL L-423 |
| . |
LY-5 |
GENERAL ELECTRIC GE VERSILUBE F-50 |
| . |
LY-5 3 |
DOW CORNING DC-200 (60,000 CS) |
| . |
LY-51 |
DOW CORNING DC-510 (1000 CS) |
| . |
LY-52 |
DOW CORNING DC-510 (100,000 CS) |
| . |
LY-60 |
DOW CORNING FS 1265 FLUID |
| . |
LY-7 |
DOW CORNING DC-200 (20) FLUID |
| . |
M |
HIGH SPEED, NON-SEPARABLE (REINFORCED PHENOLIC SEPARATOR) |
| . |
MB |
HIGH SPEED, INNER RING SEPARABLE (REINFORCED PHENOLIC SEPARATOR) |
| . |
MC |
HIGH SPEED, CONRAD-TYPE |
| . |
MCD |
HIGH SPEED, CONRAD-TYPE MINAPAR RETAINER (PLASTIC) |
| . |
MCJ |
SELF LUBRICATING, CONRAD TYPE |
| . |
MCK |
HIGH SPEED, CONRAD-' TYPE MINSPAR II RETAINER (PLASTIC) |
| . |
MR |
HIGH SPEED, FULL FACE |
| . |
N |
NARROWER THAN STANDARD |
| . |
P |
FOLLOWED BY TWO NUMBERS INDICATES RADIAL PLAY IN TEN THOUSANDTHS OF AN |
| . |
PR |
PIVOT BEARING, CLOSED END |
| . |
Q |
FOLLOWED BY A NUMBER INDICATES PEAK STARTING TORQUE IN HUNDREDS OF MG-MM. (EXAMPLE: Q15 INDICATES BEARING WITH 1500 MG-MM PEAK STARTING TORQUE. ) |
| . |
R |
RIBBON RETAINER |
| . |
ST |
TEFLON SLUG SEPARATOR |
| . |
T |
THRUST BEARING |
| . |
V |
FOLLOWED BY A NUMBER INDICATES PEAK RUNNING TORQUE IN HUNDREDS OF RAG-NUN. (EXAMPLE: V13 INDICATES A BEARING WITH PEAK RUNNING TORQUE OF 1300 MG-MM.) |
| . |
W |
WIDER THAN STANDARD |
| . |
Z |
SINGLE SEAL |
| . |
ZD-1-1 |
BORE TOLERANCE +0.0000 - .0001 O.D. TOLERANCE +0.0000 - .0001 |
| . |
ZD-1-2 |
BORE TOLERANCE +0.0000 - .0001 O.D. TOLERANCE -0.0001 - .0002 |
| . |
ZD-2-1 |
BORE TOLERANCE -0.0001 - .0002 O.D. TOLERANCE +0.0000 - .0001 |
| . |
ZD-2-2 |
BORE TOLERANCE -0.0001 - .0002 O.D. TOLERANCE -0.0001 - .0002 |
| . |
ZD-A-A |
BORE TOLERANCE +0.000000 - .000050 O.D. TOLERANCE +0.000000 - .000050 |
| . |
ZD-A-B |
BORE TOLERANCE +0.000000 + .000050 O.D. TOLERANCE -0.000050 - .000100 |
| . |
ZD-A-C |
BORE TOLERANCE +0.000000 - .000050 O.D. TOLERANCE -0.000100 - .000150 |
| . |
ZD-A-D |
BORE TOLERANCE +0.000000 - .000050 O.D. TOLERANCE -0.000150 - .000200 |
| . |
ZD-B-A |
BORE TOLERANCE -0.000050 - .000100 O.D. TOLERANCE +0.000000 - .000050 |
| . |
ZD-B-B |
BORE TOLERANCE -0.000050 - .000100 O.D. TOLERANCE -0.000050 - .000100 |
| . |
ZD-B-C |
BORE TOLERANCE -0.000050 - .000100 O.D. TOLERANCE -0.000100 - .000150 |
| . |
ZD-B-D |
BORE TOLERANCE -0.000050 - .000100 O.D. TOLERANCE -0.000150 - .000200 |
| . |
ZD-C-A |
BORE TOLERANCE -0.000100 - .000150 O.D. TOLERANCE +0.000000 - .000050 |
| . |
ZD-C-B |
BORE TOLERANCE -0.000100 - .000150 O.D. TOLERANCE -0.000050 - .000100 |
| . |
ZD-C-C |
BORE TOLERANCE -0.000100 - .000150 O.D. TOLERANCE -0.000100 - .000150 |
| . |
ZD-C-D |
BORE TOLERANCE -0.000100 - .000150 O.D. TOLERANCE -0.000150 - .000200 |
| . |
ZD-D-A |
BORE TOLERANCE -0.000150 - .000200 O.D. TOLERANCE +0.000000 - .000050 |
| . |
ZD-D-B |
BORE TOLERANCE -0.000150 - .000200 O.D. TOLERANCE -0.000050 - .000100 . |
| . |
ZD-D-C |
BORE TOLERANCE -0.000150 - .000200 O.D. TOLERANCE -0.000100 - .000150 |
| . |
ZD-D-D |
BORE TOLERANCE -0.000150 - .000200 O.D. TOLERANCE -0.000150 - .000200 |
| . |
ZDM |
GRADED FOR PAIRS OF BEARINGS HAVING MATCHED O.D.'S AND BORES |
| . |
ZO |
GRADED O.D.'S ONLY |
| . |
ZZ |
DOUBLE SEALED BEARING |
| N |
. |
BERYLLIUM COPPER MATERIAL (NON-MAGNETIC BEARINGS) |
| S |
. |
AISI 440C STAINLESS STEEL MATERIAL |
Bearing >Bearing Numbers > MPB bearing part