Dental Bearing Features
Bearing >Dental Bearings > Dental Bearing Features
HRBN Bearing has been a successful pioneer in the researching, developing and manufacturing of mechanical and electrical high-speed bearings, especially in producing high precision miniature dental bearings. Our dental drill bearing series have below outstanding features:
1.Real 500,000 rpm operation speed:
Real 500,000 rpm speed
Dedicated P4/ABEC 7 precision
Stainless steel (440C) & Ceramic (Si3N4)
Textile laminated fiber reinforced phenolic cage
Dentist has recognised that the pains during treatment could be reduced significantly if the drill bit be able to reach an extremely high rotating speed. As far as the speed is concerned, presently the 500,000 rpm is the internationally recognised highest figure under a normal working order. There are less than 10 manufacturers are able to produce their dental bearings at such top standard, however, we are one of them. PYC bearing always insist on the highest class of bearings, through thousands of prototyping, now our dental bearing series is able to sustain the 500,000 rpm speed either in a serious quality test or under a real operation.
2.Dedicated P4/ABEC 7 bearing precision:
Aside from the 500,000 rpm speed, whether can achieve P4/ABEC 7 bearing precision is another crucial factor to measure a bearing manufacturer's strength. Although a lot of factories label their products at P4/ABEC 7 precision, it's easy to find out the P5 (ABEC5) / P6 (ABEC3) precision actually is the highest level they are able to match. The counterfeit bearing usually stays at a surprised price,
but its inherent inferior quality and low precision will bring great damages to the machines or equipments. According to statistics, over 60% bearing market is flooded by the counterfeits. Due to the restrictions of materials and production technique, most counterfeits' rigidness can't reach the national bearing standards, distortion will be encountered during operation. It will finally shorten the service life of the instrument and result in damages on other parts. The unexpected gap between the different ABEC levels may also lead to difficulties of assembly and even scrap the entire equipment. HRBN Bearing never stopped pursuing the cutting-edge bearing precision from the beginning as Honda's supplier. Nowadays, we have overtaken most top bearing manufacturers, truly achieved P4/ABEC 7 level and even provided P2/ABEC 9 for some modes.
3.Stainless Steel (440C) and Super-hard Ceramic (Si3N4) materials:
HRBN Bearing adopts improved refine stainless steel (9Gr18) with great corrosion resistance for inner/outer rings and rolling elements, we also produce super-hard ceramic rolling elements (Si3N4) for high wear resistance and high temperature resistance. The selection of high quality raw-material significantly enhances bearings' durability and rotating speed, thus guarantees the overall performance of dental drills.
4.High-end Textile laminated fiber reinforced phenolic cage:
HRBN Bearing 100% concentrates on every detail and factor related to the product quality, either implementing the most rigid production standard in the workflows or selecting best components' materials. Textile laminated fiber reinforced phenolic cage likes a kind of cloth with three layers of phenolic powder on its surface. The "cloth" will be rolled and dipped into chemical oil for at least 48hrs. After drying, it will be as hard as stone, and processed on the milling machine for specific shapes. The procedure will be repeated for 5 times to finish. By adopting such cages, with our P4/ABEC 7 precision, the bearings can reach about 18 months operation life at maximum 500,000 rpm speed, and can be working at a low noise and low vibration result. Since the chemical oil is incorporated into the cage during the process, its self-lubrication and corrosion-resistant properties are superb.
Above features deliver a great dental bearings of HRBN Bearing. We enhanced the capabilities and service life of the bearings several times at the same price, create a brilliant product values for our clients, and therefore become to the NO.1 bearing supplier with the most cost effective products.
rotex 780 handpiece bearings. dental tool bearings. ceramic dental bearings. dental high speed bearings. smooth dental bearings. miniature dental bearings. dental drill bearing. bearing dental. bearing dental tools manufacturer. 7x4x2 dental bearings. dental bearing suppliers
Contact Us:
Nanjing binmei Bearing Manufacturing Co. Ltd.
Nanjing, Jiangsu, China
TEL : 0086-25-52217447
FAX : 0086-25-52300551
E-mail :
349831866@qq.com
hrbn@vip.qq.com
Copyright 2000-2020 Nanjing binmei Bearing Manufacturing Co. Ltd.