abec ball bearings

Email : 349831866@qq.com
hrbn@vip.qq.com
img

abec bearings

img
img

bearings Bearing >Skateboard Bearings > abec ball bearings


abec bearings

Abec Bearings,Abec Ball Bearings - PYC

The ABEC rating of a bearing is determined by the following (for a 608 size bearing):

   1. How close the bore is to 8mm in microns
   2. How close the outer diameter is to 22 in microns
   3. How close the width is to 7mm in microns
   4. The rotating accuracy in microns

Features :  
Shield / Closure: Open,Teflon Sealed,Rubber Seals,2 Metal Shield
Tolerance codes: ABEC-3, ABEC-3, ABEC-5, ABEC-7,ABEC-9
Material: AISI52100(Chrome Steel), AISI440C(Stainless Steel),Ceramic(Si3n4 or Zro2)
Size: 8x22x7mm 608 bearings ,  8x16x5 688 bearings ,  7x22x7 627 bearings ,  10x22x6 6900 bearings

Metal Shield Bearings
Metal Shield Bearings
Open Bearings
Open Bearings
Rubber Seals Bearings
Rubber Seals Bearings
Teflon Skateboard Bearing
Teflon Skateboard Bearing
Hybrid Ceramic Bearings
Hybrid Ceramic Bearings
Full Ceramic Bearings
Full Ceramic Bearings
Full Complement Skate Ceramic Bearing
Full Complement Skate Ceramic Bearing
Extended Ceramic Bearings with Built-in Spacers
Extended Ceramic Bearings with Built-in Spacers

The second column of the table lists the corresponding tolerance classes as defined by ISO, the International Organization for Standardization. Both systems are widely used in the bearing industry but ABEC has been adopted by skate manufacturers.

When choosing the ABEC grade, the factors to be considered are: radial and axial runout requirements, bore and O.D. fits, and audible noise level. The table below shows the bore and O.D. size tolerances and the radial runout limits for each ABEC grade. Grades 3 and 7 are preferred for most standard applications.

Normally, race finish and race geometry are superior in ABEC 5 and higher. HRBN Bearing recommends these grades for precision assemblies where low noise (mechanical or audible), minimal runout and long life are important considerations.

You might want to see these other ceramic bearings too:

 

 

 

 

inline hockey bearinginline skating wheels bearingssteel inline skate bearingsinline abec bearingsinline rollerblade bearingslongboard steel bearingsabec 11 longboard bearingshigh speed longboard bearingslongboard wheels bearing608 china zz608zz and bearings608zz bearing608zz608 high speed bearing nylon608 bearingheeleys 608 bearingsbearings abec 7 608heelys abec 1 608 bearings608 abec 7 bearingsskate bearings 8mm precision 608best rollerblade bearingsabec 9 rollerblade bearingsabec 8 rollerblade bearingshockey skates bearingsscooter bearingbearings for scooterabec 7 scooter bearingselectric scooter rear hub motor bearingsmicro scooter bearingsbearings for heelysskate board abec 39 bearingsskate board abec 9 bearingsskate skateboard bearingsroller speed skate bearingsskate boards fast bearingsbearings for skate wheelsspeed bearings for skate boardsskate bearings abec 9stainless skate bearingscheap skate board bearingsskate bearing 6801roller skate bearingsteel skateboard bearingabec 7 skateboard bearingabec 9 skateboard bearingceramic skateboard bearingskateboard abec 12 bearingscheap abec 9 skateboard bearingsabs-9 skateboard bearingsskateboard speed bearingsskateboard bearings 9ball bearings for skateboardskateboard bearings ceramicsabec 13 skateboard bearingsskateboard china bearings abec 7skateboard bearings abec7skateboard metal bearingsskateboard abec-9 bearingsskateboard bearings abec 7skateboard maintenance bearingsskateboard ceramic bearingsabec 11 skateboard bearingsskateboard bearings abec 9speed skateboard bearingsabec skateboard bearings608 bearings. rollerblade bearings. hockey bearings. scooters bearings. 7mm skate bearings. skate board bearings. bearings for skateboard. top skateboard bearings. fastest skateboard bearings. best skateboard bearings. cheap skateboard bearings.ceramic skateboard bearings. skateboarding bearings. abec bearings. inline skate bearings. inline skate wheels bearings. long board bearings. roller skate bearings . 


 

Request a Quote

All fields are required.

Contact Us:

Nanjing binmei Bearing Manufacturing Co. Ltd.
Nanjing, Jiangsu, China
TEL : 0086-25-52217447
FAX : 0086-25-52300551
E-mail :
349831866@qq.com
hrbn@vip.qq.com

Copyright 2000-2020 Nanjing binmei Bearing Manufacturing Co. Ltd.